Grease Fittings
Leakproof fittings are a special purpose fittings for use in those applications where a positive seal is essential. A special synthetic rubber seal, conforming to ASTM D2000 and SAE J200 specifications is used to provide an effective seal against light or heavy viscosity lubricants and will withstand a back pressure up to 5,000 psig (345 bars).
Leakproof fittings are a special purpose fittings for use in those applications where a positive seal is essential. A special synthetic rubber seal, conforming to ASTM D2000 and SAE J200 specifications is used to provide an effective seal against light or heavy viscosity lubricants and will withstand a back pressure up to 5,000 psig (345 bars).
Vents and Breathers are designed to allow air to escape as inside temperatures and pressures increase during operation. Vents have a range of opening pressures, while Breathers allow for unrestricted airflow. Must be installed above normal fluid level.
Button head fittings are designed for use where high volume flow of lubricant is required, such as bearings on earth moving equipment, conveyors, mining machinery, heavy machinery, construction equipment and off road equipment. Their large head size helps minimize breakage and they are heat treated for long service life.
Button head fittings are designed for use where high volume flow of lubricant is required, such as bearings on earth moving equipment, conveyors, mining machinery, heavy machinery, construction equipment and off road equipment. Their large head size helps minimize breakage and they are heat treated for long service life.
Pressure relief grease fittings are commonly used on gearbox housings and bearings, (such as king pins, universal joints, etc.), where excessive lubricant pressures are not desirable. These safety valves open at predetermined pressures and can be used with either oil or grease. Installation above fluid level is recommended.
Pressure relief grease fittings are commonly used on gearbox housings and bearings, (such as king pins, universal joints, etc.), where excessive lubricant pressures are not desirable. These safety valves open at predetermined pressures and can be used with either oil or grease. Installation above fluid level is recommended.
Also known as Zerks or Grease Nipples, are the most common type of all grease fittings. Available in many sizes both imperial (inch) and metric. Available in many materials, most common being Steel and Stainless Steel.
Thread Forming Fittings thread into a non-threaded mating part during installation. Standard 3.3 degree self-sealing, tapered thread.
Thread Forming Fittings thread into a non-threaded mating part during installation. Standard 3.3 degree self-sealing, tapered thread.
Drive Type Fittings are installed by driving them into an untapped hole, often used in high volume manufacturing. Not recommended for high pressure applications.
Drive Type Fittings are installed by driving them into an untapped hole, often used in high volume manufacturing. Not recommended for high pressure applications.